MATERIAL HANDLING & CONVEYANCE

DEFENDER™ CONVEYOR SLAT & BEAM COVERS

Albarrie’s Durafiber Boards and Pads replace graphite on lead-out tables, conveyors, lift-over arms & walking/standing beams to protect products during manufacturing.

STOP SCRAPING PROTECT YOUR FINISH.

Conveyor slat and walking/standing beam graphite pads and boards are notorious for marking products during the conveyance and material handling process. This leads to increased production costs and waste from damaged goods. Complete the production process the first time around by protecting the finish.

Albarrie’s Defender™ Felt Pads & Durafiber Boards are conveyor and slat beam covers used in place of graphite on lead-out tables, conveyors, lift-over arms, and walking/standing beams to protect critical surface finish and eliminate marking on products. They are available in various high- and low-temperature technical textiles in multiple thicknesses to suit your application. In addition, coatings and pressure-sensitive adhesives (PSA) are available in most styles.

 

Key Benefits

Excellent Protection & Non-marking

Albarrie’s Defender Series Heat Felts won’t mark your products during conveyance.

High Density

Defender™ Series Heat Felts offer more fiber per square inch, giving you a longer-lasting product.

Exceptional Service Life

Improved service life compared to other products on the market.

Wide Contact Temperature Range

Supports applications with temperatures up to 1020°F (549°C).

Product Details

ELIMINATE QUALITY ISSUES

Albarrie’s Defender™ Series Products provide ultimate protection during high heat conveyance. Albarrie’s nonwoven Nomex® Felt Tape will not mark products, eliminating quality issues from your process.

EXTEND SERVICE LIFE

Nonwoven needle-punched felt is made of two components – fiber and air. The more fibers needled into the fabric’s construction means less air space for the same material thickness. This process results in a longer-lasting product when following the manufacturer’s recommendations.

SOFT OR HARD PADS

Albarrie can produce soft or hard felt pads, depending on your application need. Albarrie typically recommends soft pads when your product sits motionless on top of the pad. However, we advise using a hard pad when your product moves against the pad.

KEVLAR® DURAFIBER BOARDS

Starting as a soft pad, Albarrie creates its Defender™ Series Durafiber Boards using a proprietary resin treatment process. This process creates a stiff and rigid board, like lumber. Made from bonded Kevlar®, the boards can be shaped, drilled, countersunk, and cut into complex shapes to replace graphite and wood in a handling system. They offer exceptional performance in both wet and dry applications.

CUSTOM-DESIGNED FOR PRECISE FIT

Albarrie manufactures your heat felts to plant specifications, ensuring a precise fit. We offer a wide range of fabric and coating combinations with various properties to enhance performance depending on the application.

Information provided by Albarrie on this website (the "Site") is for general information purposes only. All information on the Site is provided in good faith, however Albarrie makes no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the Site. Products may not work as advertised or perform differently based on application, operating conditions, and depend on chemical, thermal, and humidity and other factors.

Options

PBO Kelvar
Kevlar®
Nomex® 
Polyester
Flash Cutting
Pressure-Sensitive Adhesives
Soft or Hard Fabric Customization | Albarrie
Soft or Hard
Complex Shapes

Applications

Albarrie Textile Industry
Standing Beams
Transfer Arms | Material Handling and Conveyance
Transfer Arms
Albarrie Textile Industry
Walking Beams
Racks in Heat Treating | Material handling and Conveyance
Age Carts or Racks In Heat Treating
Storage Racks | Material Handling and Conveyance
Storage Racks