Nonwoven Felt Seals

Ultra-low permeable felts to stop air leaks

Do you perform quarterly inspections at your plant? When you inspect the dryer drum and baghouse, do you look at the wear on the seals? It is not uncommon for the seals to be overlooked however it is critical to change these out to avoid unforseen nightmares and to ensure maximum operating efficiency.

We have a unique solution that won’t crystallize and can last for years. Nonwoven felt seals provide an ultra-low permeability giving you the best protection against air leaks at a good price. Right now you can take off an extra 10% off either product until October 31st, 2020 just provide the discount code DDSeal2020 to your Sales Rep.

 Take 10% off

until Oct 31, 2020

 Call: 1-855-737-3906

Code: DDSEAL2020

BAGHOUSE DOOR SEAL

ASPHALT DRYER DRUM SEAL

Dust collector parts - Baghouse Door Seal

Albarrie’s door seal is specifically designed to stop air leaks, create system efficiency, and save you money!

Our dust collector specialists realized that many baghouses had an inadequate seal on their doors, causing many problems, like: emission failure, increased energy consumption and reduced production times. Albarrie created an innovative solution that not only eliminates these problems, but is easy to install and cost-effective. Albarrie‘s door seal is composed of a fabric strip with an adhesive component that allows for easy installation.

Advantages of Albarrie’s Door Seal includes:

  • It will not become brittle or crystallize as fragile rubber seals do.
  • Can operate in all baghouses, with ambient temperatures up to 260°C (500°F).
  • Remains in place once seal is made and pressure is applied.
  • Cures onto the metal surface when exposed to heat.
  • Is custom fabricated for use on any baghouse door.

Easy installation – simply peel and stick onto the surface

GET A QUOTE
Kevlar, felt pads

It can get expensive to replace the rubber seals used on dryer drum mixers in asphalt plants, but Albarrie has an innovative, cost-effective solution.

Albarrie’s dryer seal restricts air entry and heat escape in and out of the drum while aggregates pass through it. Unlike ordinary rubber gaskets, which require frequent replacement and are overly rigid, these dryer drum seals have the ability to compress without leaving gaps – even when uneven surfaces or slight warping of the flange occurs.

Albarrie’s dryer drum seals are custom fabricated to fit and operate on all dryer drum mixers from ambient temperatures up to 500°C (932°F). Unlike fragile rubber seals, Albarrie dryer drum seals will never become brittle or crystallized when exposed to heat or cold.

Many asphalt producers have achieved a 5-year service life span using Albarrie’s dryer drum seals compared to a year for typical rubber seals. Our seals will even last on portable plants that have been dismantled and assembled as many as five times in a season.

Our engineering capabilities, enable us to design felts specific to individual process and equipment needs. Call or email us today to get started!

GET A QUOTE

Nonwoven Felt Seals

Ultra-low permeable felts to stop air leaks

Do you perform quarterly inspections at your plant? When you inspect the dryer drum and baghouse, do you look at the wear on the seals? It is not uncommon for the seals to be overlooked however it is critical to change these out to avoid unforseen nightmares and to ensure maximum operating efficiency.

We have a unique solution that won’t crystallize and can last for years. Nonwoven felt seals provide an ultra-low permeability giving you the best protection against air leaks at a good price. Right now you can take off an extra 10% off either product until October 31st, 2020 just provide the discount code DDSeal2020 to your Sales Rep.

 Take 10% off

until Oct 31, 2020

 Call: 1-855-737-3906

Code: DDSEAL2020

BAGHOUSE DOOR SEAL

Dust collector parts - Baghouse Door Seal

Albarrie’s door seal is specifically designed to stop air leaks, create system efficiency, and save you money!

Our dust collector specialists realized that many baghouses had an inadequate seal on their doors, causing many problems, like: emission failure, increased energy consumption and reduced production times. Albarrie created an innovative solution that not only eliminates these problems, but is easy to install and cost-effective. Albarrie‘s door seal is composed of a fabric strip with an adhesive component that allows for easy installation.

Advantages of Albarrie’s Door Seal includes:

  • It will not become brittle or crystallize as fragile rubber seals do.
  • Can operate in all baghouses, with ambient temperatures up to 260°C (500°F).
  • Remains in place once seal is made and pressure is applied.
  • Cures onto the metal surface when exposed to heat.
  • Is custom fabricated for use on any baghouse door.

Easy installation – simply peel and stick onto the surface

GET A QUOTE

ASPHALT DRYER DRUM SEAL

Kevlar, felt pads

It can get expensive to replace the rubber seals used on dryer drum mixers in asphalt plants, but Albarrie has an innovative, cost-effective solution.

Albarrie’s dryer seal restricts air entry and heat escape in and out of the drum while aggregates pass through it. Unlike ordinary rubber gaskets, which require frequent replacement and are overly rigid, these dryer drum seals have the ability to compress without leaving gaps – even when uneven surfaces or slight warping of the flange occurs.

Albarrie’s dryer drum seals are custom fabricated to fit and operate on all dryer drum mixers from ambient temperatures up to 500°C (932°F). Unlike fragile rubber seals, Albarrie dryer drum seals will never become brittle or crystallized when exposed to heat or cold.

Many asphalt producers have achieved a 5-year service life span using Albarrie’s dryer drum seals compared to a year for typical rubber seals. Our seals will even last on portable plants that have been dismantled and assembled as many as five times in a season.

Our engineering capabilities, enable us to design felts specific to individual process and equipment needs. Call or email us today to get started!

GET A QUOTE

WANT TO LEARN MORE?

CONTACT US